Nicebeam Red Light Therapy Leg Wrap Pro

The red light therapy leg wrap is designed to help reduce inflammation and support faster healing in only a few sessions. FDA Registered, CE Certified — built for reliable at-home use and consistent daily support.

It targets muscle and joint discomfort, poor circulation, and post-workout soreness with steady red and infrared light. Ideal for athletes, active lifestyles, or anyone who wants simple, wearable therapy for daily recovery.

198 triple-chip LED diodes deliver 660nm red light and 850nm near-infrared light across the full surface of the wrap. Each LED contains 3 chips (1 red + 2 NIR) — 594 chips total — delivering >100 mW/cm² of irradiance directly into the tissue when worn against the skin. The result is meaningful therapeutic depth, not just surface warmth.

The Smart Controller gives full control: three light modes, five brightness levels, and a timer with 6 increments from 5 to 30 minutes.

*Benefits may vary by individual and device.

Everything you need is included:

• 1 × Nicebeam Red Light Therapy Leg Wrap Pro (Main Unit)
• 1 × Smart Controller
• 1 × Power Adapter (DC 12V)
• 1 × Power Cord
• 1 × Stretchy Strap Set
• 1 × User Manual

Step 1: Connect to power
Connect the Power Adapter to the Smart Controller, connect the Controller to the Leg Wrap, then plug the Adapter into a standard wall outlet. Ensure power is off before making any cable connections.

Step 2: Position the wrap on the treatment area
Wrap the device around your leg with the LED panel facing directly against the skin — direct skin contact gives maximum irradiance (>100 mW/cm²). The large 31 × 48 cm pad covers the full calf, knee, thigh, or lower back. For best results, position the centre of the wrap over the area of most pain or tension.

Placement options:
• Thighs / quads / hamstrings: for post-leg-day recovery and running soreness
• Knees: wrap fully around the joint for arthritis and stiffness
• Calves: for cramps, tightness, and circulation support
• Lower back: lay flat or strap loosely to the lumbar region

Step 3: Secure the straps
Use the included stretchy straps to hold the wrap snugly in place. Firm enough to maintain LED contact — not tight enough to restrict circulation or feel uncomfortable.

Step 4: Select your mode on the Smart Controller
Press the Power button to turn on, then customise your session:

• Mode button: cycle through light modes
— ALL (Red + NIR): both wavelengths on simultaneously — recommended for most sessions
— 660nm only: red light for surface tissue and circulation
— 850nm only: near-infrared for deeper muscle and joint treatment

• Brightness (Lvl): adjust intensity from L0 (lowest) to L4 (highest)
Start at L1 or L2 for first sessions; increase as comfortable.

• Pulse Mode: activate 10Hz flicker for pulsed therapy (often used for cellular stimulation and heat management)

• Timer button: set session duration — 5 / 10 / 15 / 20 / 25 / 30 minutes
The device auto-shuts off when the timer ends.

Step 5: Relax for 20–30 minutes
Sit or lie down — the wrap is hands-free. You'll feel a gentle warmth as the near-infrared light penetrates tissue. This is normal and expected. Do not use under heavy blankets or in enclosed spaces that may trap heat.

Note: Most of the LEDs emit 850nm near-infrared light, which is invisible to the naked eye. The wrap may look like it has LEDs that aren't lit — this is normal. All chips are working. Use your smartphone camera to confirm: the NIR LEDs will appear as a faint pink or purple glow.

Recommended frequency: 1–2 sessions per day, 20–30 minutes each.

Important: Do not use on open wounds, areas with active infection, or directly over metal implants. Do not use lotions, oils, or essential oils on skin during treatment as they may damage the wrap surface. Consult your doctor if you have DVT, epilepsy, a pacemaker, or are pregnant.

Product Name: Nicebeam Red Light Therapy Leg Wrap Pro
Product Size: 310 × 480 mm (approx. 31 × 48 cm / 12.2" × 18.9")
Rated Power: 40W
LED Quantity: 198 diodes — triple-chip technology (594 total chips)
LED Configuration: 1 × 660nm Red chip + 2 × 850nm NIR chips per diode
Total Chip Count: 198 Red chips + 396 Near-Infrared chips
Wavelengths: 660nm (Red, visible) + 850nm (Near-Infrared, invisible to naked eye)
Irradiance: >100 mW/cm² at 0 inches (direct skin contact)
Power Supply: DC 12V / 6A (via included adapter)
Timer: 5 / 10 / 15 / 20 / 25 / 30 minutes (adjustable, auto shut-off)
Brightness Levels: L0–L4 (5 levels)
Modes: ALL (Red + NIR) / 660nm only / 850nm only / 10Hz Pulse
Material: Neoprene
LED Lifespan: 50,000+ hours
Certifications: FDA Registered, CE Certified
Warranty: 1 Year

*Engineered for safe, reliable performance.

To keep your product working perfectly:
• Wipe clean with a damp cloth — do not submerge in water.
• Avoid harsh chemicals or abrasive cleaners.
• Store in a cool, dry place when not in use.

Built to last, with simple upkeep.

Free International Shipping
• USA: most orders arrive in 5–7 business days (up to 14 for some products).
• Canada, UK, Australia, New Zealand, Hong Kong, China, India, Russia: typically 7–14 business days.
• Tracking information is provided once your order ships.

30-Day Money-Back Guarantee

Your Red Light Therapy Leg Wrap Pro comes with a 1 Year Limited Warranty covering defects in materials and workmanship — ensuring you’re protected from unexpected issues.
We stand behind the quality of our products because your results matter.